Doorbell Intercom Cover Plate — 3D Printed Ring Doorbell Retrofit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A custom 3D printed retrofit plate for upgrading a vintage intercom to a Ring doorbell
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
When the original NuTone intercom doorbell at my house stopped working, I decided to reuse the existing wiring and upgrade it to a modern Ring wired doorbell.
The challenge was the giant, oddly shaped opening left behind by the old intercom. Instead of patching the stone or removing the old mounting location, I designed a custom 3D printed cover plate that keeps the look of the original while giving it a clean home for a modern smart doorbell.
This was printed in PLA as a quick solution, and surprisingly it has held up for over a year. The installation is partially protected from direct rain and sunlight, which has helped, I’m sure.
Features:
Replacement cover plate for a classic NuTone-style doorbell/intercom
Designed to fit a Ring wired doorbell
Reuses existing doorbell wiring
Mounts in the original intercom location
No wall modification required
Simple print-and-install retrofit
Print settings:
Material: PLA (PETG recommended for fully exposed installations)
Layer height: 0.2 mm
4+ walls recommended
Supports: none