Wise Old Man Costume Set - Old School Runescape
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully 3D printable set of costume items for Old School Runescape's Wise Old Man. Includes beard, glasses, and partyhat.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 1
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wise Old Man Costume Set
Happy Halloween!
This is a fully printable set of accessories to make a simple Wise Old Man costume.
All parts fit on a ~220mm printer.
These were sized for an adult head.
Suggest doing some test prints for fitting, especially for the hat.
Beard
Two options for neck strap: 20mm flat elastic (recommended) or 3mm rope.
Organic supports recommended for the chin support.
Bed contact is minimal, take care to ensure good adhesion!
Suggest 0% infill and few perimeters to reduce weight for comfort.
An SVG of the 2D shape is also included to cut out a felt or paper version.
Glasses
Two options: All-in-one or sliding fit with frame and arms separate. Tolerance for the separate version is 0.05mm per side, suggest gluing or adjusting to a press fit for your printer.
Supports might be required and will almost certainly improve comfort for the earpieces.
The nose-piece is sculpted for comfort while preserving the low-poly look. Suggest sanding and adjusting width if you plan on wearing for an extended period.
Suggest printing as lightweight as possible to improve comfort.
Hat
I made this very quickly for completeness' sake. You can easily cut one out of A2/24-inch blue cardstock for an easier (probably better) option.
Disclaimer
These were cobbled together for a party costume.
The meshes are messy and overly large.
They print fine, but please don't expect cosplay quality.
Credits
Designed using head sizing models by Budwin.
The glasses arms were taken from this model by Layer Labs.
Thank you for your superior skills.
See photos of the printed models in the Makes tab.
Thank you for your attention, bye~