Little Snitch 5 Propeller Beanie
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another fun merch for the fans of our app firewall Little Snitch (https://obdev.at/littlesnitch)
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
Here is another fun merch for the fans of our app firewall Little Snitch. While our previous toy was flat, representing the current version of the app, previous versions were 3D, well suited for printing.
The print consists of nine parts which can be snapped together without any glue.
Segment.stl 3 times in white
Segment.stl 3 times in orange
Ring.stl, Center.stl and Propeller.stl once in gray
Segment.stl and Center.stl require support while all other parts print well without support.
Printing Segment.stl "upright" (narrow end at the top) should give best results. The supports then will not be placed at the contact areas where the segments are touching, and you will get the rings around the beanie.
For assembly instructions see the Little_Snitch_5_assembly.mp4 video in the files section.