Dyson Remote Magnetic Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For use with 16 x 16 x 5.2mm craft magnets (with M3 Screw center)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Thanks to @RamjetX for the great original model.
by @CriptasticHacker
https://cripsrise.neocities.org/
Please leave a ♥ if this helps you :)
Indluded here is also a blank holder for remixing to your hearts content.
I like magnets – I prefer not to drill into walls n things. This is for those of us with magnetic desks and such to attach a remote holder to.
Magnet style: https://www.kjmagnetics.com/mm-a-16-neodymium-countersunk-mounting-magnet?
(can also be bought from large box retailers)
PLA - standard settings (Overture PLA used cause its cheap)
0.3mm height
25-40% infill
4 walls
no supports
Printed on (rooted with KAMP and Fluidd) Creality K1C
Print time = ~26min