1 / 1
Round Corners for 3.25 inch PVC crown Moulding
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sleek corners to get rid of difficult edge joining of crown moulding.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
Trim manufacture has varied wildly over the years, so I've included a small test piece. I found you can join these if they are printed in PLA to the PVC with clear PVC plumbing glue. I noticed the batch of trim I had ended up at an incorrect angle, (the flat sides on the outer surface were not aligned with the wall,) so I've included a mounting bracket model.
The set includes files for 90 degree hard corners, and 3/4 inch rounded corners.