Smaller Harmon Kardon speaker volume knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original knob was too big for my speaker. The volume knob stub on my speaker is 6mm diameter, so I took the…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 107
- Wydruki
- 2
- Wyświetlenia
- 421
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
The original knob was too big for my speaker. The volume knob stub on my speaker is 6mm diameter, so I took the original design from DivePADI and shrunk it a bit in order to retain the original geometry (which is very nice, thank you). Also the stub for my knob is inside a 8.5mm recess, so a little bit of Tinkercad later, we have the final output, which fits on the stub and inside the recess.
You do need to print with supports, sorry, but once printed, it fits real nice :)
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: Amazon basics PLA translucent yellow
Category: Electronics