1 / 2
Radbody Piranha body clip V2 for XBSF — zdjęcie 1
1 / 2

Radbody Piranha body clip V2 for XBSF

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Body Clip for normal size mini-z cars, adapted for Xbility SF

Ocena
0 / 5
Polubienia
1
Pobrania
15
Wydruki
0
Wyświetlenia
68
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The Radbody Piranha is a very nice body, but orginally came with a bodyclip made for cars with a shorter mounting position, like the Reflex RX28. It did not fit standard (Kyosho) size cars. 

This V2 version was made to fit my Xbility SF. Slightly different dimension in this car allowed the clips to be a bit thicker in places. It should likely fit other cars as well. I printed it with PETG, with a 0.2mm nozzle. you might want to experiment with print direction. So far vertical printing has worked. Tested an ASA version for 1000+ laps without issues or coming loose. 

Added three height offsets: low (2 dots), mid (1 dot) and high (no dots), with about 0.5 mm difference between them. For me mid hits the sweetspot with new RRxx tires. 


I've also made a front bumper mount: 



The older versions for the MRV can be found here:
https://www.printables.com/model/1544521-radbody-piranha-bumper-mount
https://www.printables.com/model/1483494-radbody-piranha-body-clip

Tagi