Pebble the Crystal Crab | Prusa INDX ColorMix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A curious little crab with a colourful crystal shell. Painted Prusa INDX ColorMix 3MF and STL included.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Meet Pebble, a little crab with a big collection of shiny rocks.
With curious eyes, chunky orange claws and a colourful geode shell, he's a cheerful little companion for your desk or shelf. Blue, violet and turquoise crystals make him a fun way to explore Prusa INDX ColorMix.
What's included
Painted INDX 8T 3MF: the editable PrusaSlicer project with prepared colours and support settings.
STL: the same model for your own printer and colour scheme.
Size: approximately 86 × 102 × 100 mm. This is a static figurine; the legs and claws do not articulate.
Printing
The included project uses a 0.4 mm nozzle, 0.10 mm layers, 2 perimeters and 10% gyroid infill, with Snug supports and a 5 mm brim.
Open the 3MF as a project and check the filament mapping before slicing. Supports are required; remove them carefully around the legs and eyestalks. Colours will vary with your filament and lighting.
Give Pebble your own colours and share a make—we'd love to see him on your desk!
Licence
CC BY-NC-SA 4.0: free for non-commercial printing, sharing and remixing with credit. Shared adaptations must use the same licence. Please contact the creator for commercial permission.