Genmachine + RTX 4060 LP Custom Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Transform your Genmachine Mini PC into a 1.78L gaming powerhouse with this custom enclosure.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
🚀 Ultra-Compact 1.78L Genmachine + RTX 4060 LP Custom Case
Transform your Genmachine Ren Mini PC (Series 4000/5000/6000/7000) into a sub-2-liter gaming powerhouse with this sleek, custom-designed enclosure. Engineered for maximum space efficiency and thermal performance, this case perfectly houses a dedicated desktop GPU while maintaining an ultra-minimalist footprint.
🎨 The Vibe: This case was built to push the limits of SFF (Small Form Factor) design. I wanted to combine the tiny Genmachine motherboard with the low-profile Gigabyte RTX 4060, creating a ridiculously small but capable rig while ensuring the Pico PSU and GPU stay cool via strategic active exhaust.
⚠ Disclaimer: Beta Version
Note: This model is a fresh design. While dimensionally tuned for these specific components, tolerances can vary based on your printer and filament shrinkage. Some minor modifications or "fiddling" might be required during assembly. If you print this, I would greatly appreciate your feedback, makes, or remixes to help perfect the final design!
📏 Dimensions
Length: 241.47 mm
Width: 195.50 mm
Height/Thickness: 65.50 mm
Internal Volume: Approx. 1.78 L
🛠 Technical Specifications
Core System: Genmachine Ren Mini PC (Ryzen 7 5700U ES)
Memory: 16GB RAM 3200MHz (Dual Channel)
GPU: Gigabyte RTX 4060 LP (Low Profile)
Cooling System: Designed for up to 3x 40x20mm exhaust fans to pull heat away from the GPU and Pico PSU.
Heat 3D Inserts: M3 x 5mm x 4mm (Standard chassis assembly).
Recommended Material: PETG, ASA, or ABS (High thermal resistance is mandatory due to the densely packed GPU and PSU components). PLA ONLY FOR PROTOTYPING.
📦 Bill of Materials (BOM)
Qty | Component | Notes |
1x | Genmachine Ren Mini PC | Any Genmachine REN Series motherboard (4000/5000/6000/7000 |
1x | Gigabyte RTX 4060 LP | Low-profile graphics card, only gigabyte model compatible |
1x | Pico PSU | Internal power delivery |
2x | Thermalright 40x20mm Fans | Exhausting air out (Case supports up to 3) |
1x | M.2 to PCIe Riser / Adapter | For connecting the RTX 4060 to the Genmachine board |
1x | Multi 3D-Inserts Box | M3 heat-set inserts for secure chassis assembly |
1x | M3 Screw Assortment | Matching screws for the heat-set inserts |
🖨 Print Settings (Fits standard 250x250 beds)
Filament: PETG, ASA, or ABS (Highly recommended for temperature stability).
Walls/Perimeters: 3 to 4 walls for structural rigidity and better thread engagement with the heat-set inserts.
Infill: 25% - 40% (Grid or Gyroid).
Supports: Required for critical overhangs, I/O cutouts, and ventilation grills.