1 / 2
2" Neoprene Puck Rack — zdjęcie 1
1 / 2

2" Neoprene Puck Rack

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed for plant propagation. holds the 2" pucks in a row so that they will float in a tray filled with water.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
8
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial
Size: 252.8 x 60.0 mm, 5.4 mm thick
One long edge: 3 male tabs (8.0 x 4.2 mm)
Opposite edge: 3 female U-pockets (8.6 x 4.5 mm, +0.3 mm fit)

HOW THEY JOIN
Keep every strip in the same orientation (tabs pointing the
same way). Drop the male tabs of one strip into the female
pockets of the next. The tab nests inside the 60 mm body, so
4 strips still pack to 240 mm.

PRINT
- PETG, dark color
- 0.20 mm layer, 3 walls, 4 top/bottom, 15% infill
- No supports, print flat
- If the tab is too tight after printing, lightly file the
  pocket or scale X/Y 100.3%