1 / 1
Rowenta Fan Nut — zdjęcie 1

Rowenta Fan Nut

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is the center nut to go with the Rowenta VU2630 fan repair model. Works with VU2531 as well.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
15
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

The plastic handle and mount bracket has three little nubs and center threads that break over time. 

@Kilian_220917 Made the entire bracket to replace the broken piece and this is the nut to go with it if you lost it or it broke. The threads get a little whispy at the edges due to overhang but I was able to peel away the strands and it still mated really well with the bracket threads.

My Fan model is actually the VU2531 and the 3 little nubs on that model are a little bigger than the bracket nubs that Kilian made for the VU2630. Therefore I also made some Nub covers that slip over the 2630 nubs to fit the 2531. You could take the nubs and add them directly to the main model if you have the time and skills but this is a working solution. The image shows the 3 black nub cover fitting snug as a bug.

I printed in ABS at .2 layer height. For the nut a smaller layer would likely produce cleaner threads. PETG and PLA are probably just fine for this entire project.