Rowenta Fan Bracket Nub
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter nub converts VU2630 to VU2531 size.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Some Rowenta desk fans have a plastic handle/mount bracket with three little nubs and center threads that break over time.
@Kilian_220917Made the entire bracket to replace the broken piece. My Fan model is actually the VU2531 and the 3 little nubs on that model are a little bigger than the bracket nubs that Kilian made for the VU2630. Therefore, I made some Nub covers that slip over the 2630 nubs to fit the 2531. You could take the nubs and add them directly to the main model if you have the time and skills but this is a working solution. The image shows the 3 black nub cover fitting snug as a bug.
Also made the nut to go with it if you lost it or it broke. The threads get a little whispy at the edges due to overhang but I was able to peel away the strands and it still mated really well with the bracket threads.
I printed in ABS at .2 layer height. PETG and PLA are probably just fine for this entire project.
