Hex Bumpon Riser Legs (Remix for NexGen3D DIY Steam Machine Redux)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this for makers who find printing flexible TPU tricky or don't have TPU on hand.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Hex Bumpon Riser Legs (Remix for NexGen3D DIY Steam Machine Redux)
This is an alternative leg design created for the fantastic NexGen3D DIY Steam Machine Redux Edition.
I designed this for makers who find printing flexible TPU tricky or don't have TPU on hand. Instead of printing the entire foot in flexible filament, you can print these rigid legs in PLA or PETG and pair them with standard adhesive rubber bumpons.
Features & Installation
Plug & Play: Designed to push-fit directly into the hexagonal openings on the bottom mesh plate.
Bumpon Specification: Fits standard 9mm diameter adhesive rubber/silicone bumpons.
Provides solid elevation and bottom clearance for smooth intake airflow.
Recommended Print Settings
To ensure the recessed pocket bridges cleanly so the adhesive bumpon sticks flat and securely, I recommend adjusting your bridge parameters:
Bridge Flow Ratio: 1.5 (150%)
Bridge Speed: 30 mm/s
With these settings, the bridging surface prints cleanly without sagging, giving you a smooth surface for the bumpon pads.
Happy printing!