1 / 7
VIXEN Accessory Holder for ZWO AM3/AM5 Mount Pier Extension — zdjęcie 1
1 / 7

VIXEN Accessory Holder for ZWO AM3/AM5 Mount Pier Extension

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The model includes a 150 mm VIXEN dovetail bar that mounts onto the Pier Extension for Mount ZWO TC40 Carbon Fiber.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
37
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Public Domain

The model includes a 150 mm VIXEN dovetail bar that mounts onto the Pier Extension for Mount ZWO (ZWO TC40 Carbon Fiber Tripod). The accessory holder features two clamps, VIXEN and Losmandy, for universal use.

Mounting the dovetail bar

Drill two or three 5 mm holes into the pier extension and tap them with an M6 thread. Then screw the bar onto the extension.

Hardware required to assemble the holder

  • M6 hex head bolt, 60–80 mm long

  • 1× M6 washer

  • 1× M6 brass heat-set insert, melted into the holder body to hold the bolt

Recommended printing material

I recommend Prusament PC Blend Carbon Fiber, ASA, or another durable material. PLA is not recommended.


Pokud chcete, můžu na začátek přidat i krátkou úvodní větu nebo tagy vhodné pro Thingiverse (např. astrophotography, ZWO, AM5, Vixen, dovetail).

Tagi