DYMO Labelmanager 280 Gridfinity tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A DYMO Labelmanager 280 Gridfinity tray with some room for accessories.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a gridfinity tray for my DYMO Labelmaster 280 but couldn't find one, so I made my own.
The printer fits snugly with a small bit of wiggle room.
There is some storage for cables and 3 D1 cartridges, so you can utilise the entire footprint and keep those together with the printer.
Let me know what you think and if you have suggestions for improving the model.
Note:
I took some dimensions from this model on makerworld: https://makerworld.com/en/models/2951714-dymo-label-manager-280-organiser-tray
The gridfinity base is based on a parametric model by Akio, and you can insert 6mm magnets into it: