1 / 3
Manual brake for golf trollies with 48,6mm frame, e.g. Jucad Titan Pro
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brake mount for golf caddies with 48,6mm frame diameter
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have a Jucad Titan Pro trolley with a frame diameter of 48,6mm. Unfortunately, all commercially available brakes for Jucad only support frame diameters up to 25mm - the 48,6mm are older models and (I was told) motor-trollies, which are not supposed to have an additional manual brake.
Therefore I designed my own brake mount and used the original Jucad metal rod. I printed it with PETG and 7 layer walls, 100% infill. The screws are M6 45mm length and square nuts.