1 / 8
OpenPuck 90° Deg Case ProMicro NRF52840 DIY — zdjęcie 1
1 / 8

OpenPuck 90° Deg Case ProMicro NRF52840 DIY

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

OpenPuck Case with right or left angle for nRF52840 for new Steam Controller.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
57
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

Hi,

I want to have a case for the OpenPuck Adapter but with a right or left 90° deg angle, so i made one. Because behind my computer there is no much space. and the original steam controller is only for charging.

If you ask what OpenPuck is, please have look to the project page on github.
-------------------------------------------------------------------------------------------
Safijari's OpenPuck project on GitHub: https://github.com/safijari/openpuck
-------------------------------------------------------------------------------------------

Designed to fit a Pro Micro NRF52840  
1x 2 Pack https://www.amazon.de/dp/B0FKH1BTZZ
1x USB 90°deg Adapters  https://www.amazon.de/dp/B0C5LYYP9V
In this pack you have 2 right and left USB A to USB C adapters, please see on the photo.

The Files you got here:

a Blank lid so you can write what you want in your slicer
Left written "OpenPuck" 
Right written "OpenPuck"

Happy printing and leave your feedback.

Tagi