Ubiquity AirCam hole plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rather than remove the screw-in mount from an obsolete Ubiquity AirCam Dome G1, this cap is designed to be a push-fit…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Rather than remove the screw-in mount from an obsolete Ubiquity AirCam Dome G1, this cap is designed to be a push-fit in the hole once the camera is removed.
A friend had cameras fitted in the roof-line which were a PITA to fit, so the idea of removing the fittings from the inside and capping the hole was unattractive.
This plug neatly sealed the hole instantly.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Notes:
Print upside down in black to match the AirCam mount.
OpenSCAD has default (fairly) low polygon settings which makes the plug tighter - the stepped circle ridges bite into the mount.
Category: DIY