Replacement Shade for a Pendant Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement pendant lampshade with a soft hourglass shape. Replica of the two non-broken ones.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple pendant lampshade with a slightly curved hourglass profile. Designed as a replica of a broken one (the two further back in the photo are the original glass ones).
The smooth version gives even, diffused light and keeps the shape visually simple. It works especially well with white or translucent filament. However, the light highlights the infill pattern, so infill artefacts are visible. This might be possible to mitigate by increasing the wall thickness or using a different infill (or vase mode).
Use only with LED bulbs, and make sure the bulb doesn't get hot enough to soften the printed shade.
Printed on a Prusa MK3S with a 0.4 mm nozzle and 0.2 mm layer height. Generic white PETG, no supports.
For your convenience, I've included all the files (.3mf, .stl, .gcode).
Looking forward to seeing your makes and hearing your comments.