The Sword Riptide (Anaklusmos) - Percy Jackson
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print sword design based on the movie "The Lightening Thief"
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Public Domain
A kid I know is nuts about Percy Jackson so he needed a Riptide sword for his birthday. The designs I saw had very thin edges, didn't seem all that durable, and weren't the easiest to print. So I had a go at it.
If you want this to be a usable prop you can swing around and play with, you'll need a 3/8" (~10mm) dowel to run down the middle, otherwise the handle will snap right off. A wooden dowel from your local hardware/craft store will work great. Even with the dowel, it'd probably be a bad idea to try to hit things with this.
Overall length is just under 24" (594mm.) The blade pieces are 202mm high.
I've included a plain hilt and blade if you want a sword but don't want to be all "Percy Jackson" about things.
I printed with supports on the hilt, but you can probably get away without them. There are guide holes on the blade pieces that are sized to fit filament so you can line the pieces up for assembly.