IN-1 Nixie Tube base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
So recentley I was bitten by the Nixie Bug and startet playing around with them and building clocks, electronics and…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 525
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
So recentley I was bitten by the Nixie Bug and startet playing around with them and building clocks, electronics and other things like a madman. Having now partialy recovered (after a sucsessfull Nixie tube clock build) I thought I could save you guys some hassle and share some of my work.
Here is a base for the IN-1 tubes. It is designed to take MOLEX style female connectors wich have to opened up a slight bit with an old nail or something like it.
Print instructions
Print the base, get some female MOLEX style terminals, open them up a bit with a nail or similar, insert them into the holes. put in the nixie FIRST and then solder wires!!! important if you solder without the nixie the plastik will melt and the pinns will be missaligned!