Bottom Lid for Mac Mini A1347 2012
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A drop-in replacement for the missing part
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
A lid for the Mac mini A1347 2012 I made as an effort to upcycle a small batch of devices from a recycling centre.
Printing advice in case you decide to use stl instead of prepared 3mf:
Orient by letters facing down. It will leave very nice surface finish
Use snug supports on build plate only, to ensure the nice finish of the walls
Put support blockers on the Mac mini wording (Photo 4). It will print fine for as long as you:
Rotate/direct the flow of the infill (or the model itself) so that it goes in parallel with the word direction (Photo 5, 6)
And yes, print with somewhat wlexible plastics. PLA and PETG are ok.
Once printed, bolt fixers need to be somewhat developed - rotate the lid a few times before letting it settle in place. It will require f-o-r-c-e.
Feel free to stick some furniture pads underneath, why do that tho?