1 / 4
Simple Backpack Strap Clip - 25 mm (1 inch) — zdjęcie 1
1 / 4

Simple Backpack Strap Clip - 25 mm (1 inch)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Helps keep loose strap secured

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
14
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

A simple backpack strap clip that helps keep loose strap secured and prevents it from flapping around while walking.

The clip keeps the excess portion of the backpack strap neatly tucked in without requiring permanent modification to the backpack.

This will fit 25mm/1 inch strap, I will add more sizes soon.

 PETG is recommended for outdoor use, you can also use PLA but it might not last long if using outdoors.

 Print Settings

  • Material: PETG

  • Layer Height: 0.20 mm

  • Walls: 2

  • Infill: 15–20%

  • Supports: No

If you find this helpful please rate.

Tagi