1 / 4
Replacement Knob for Luxe Bidet — zdjęcie 1
1 / 4

Replacement Knob for Luxe Bidet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This knob fits perfectly on Neo 120 but it might fit other models as well.

Ocena
0 / 5
Polubienia
2
Pobrania
4
Wydruki
0
Wyświetlenia
20
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

I created this replacement knob for the Luxe Bidet NEO 120 after having to replace the original knob. The replacement knob from the manufacturer costs around $8 each, and in my experience, the original knob did not last as long as I expected.

Rather than continuing to purchase replacement knobs, I designed a 3D-printable replacement that can be printed at home whenever one is needed.

 Printing Recommendations

Material: PETG recommended
Layer Height: 0.20 mm
Walls: 2
Infill: 15%
D-Shaped Hole: 100% infill modifier
Supports: yes

Strength Note: A 100% infill modifier has been added around the D-shaped mounting hole to provide additional strength in the area that transfers torque from the knob to the bidet valve stem. The remainder of the knob uses the recommended infill to reduce print time and material usage.

Recommended: Use the included print profile so the 100% infill modifier around the D-shaped hole is retained.

Notes

This is an independently designed replacement part and is not affiliated with or endorsed by Luxe Bidet.

I designed and tested this replacement with my own Luxe Bidet NEO 120. Fit and performance may vary depending on printer accuracy, filament, and print settings.

Please inspect the printed part before installation and replace it if it becomes damaged or worn.

If you print one, I'd appreciate seeing your make and hearing how it works for you!

Tagi