Large Twisted Hex Vase for LEGO Botanicals Flower Bouquet (10280)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 165 mm twisted hexagon vase sized for the LEGO Botanicals Flower Bouquet (10280). No supports, no brim.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 54
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
A larger version of my twisted hex vase, designed for the LEGO® Botanicals Flower Bouquet (10280). The photo also has a couple of daisies from the Daisies set (11508) mixed in.
Size: 165 mm tall, 114 mm across at the widest point, with a neck opening of about 49 mm. That's wide enough for all of the thick axle-based stems in 10280 plus extras, with room to arrange them.
Files
bouquet-vase.stl: 0.85 mm walls, exactly two lines with a 0.4 mm nozzle, so it prints as clean continuous loops.
bouquet_vase.scad: OpenSCAD source. You can change the height, twist, width and wall thickness.
Print settings
These are the settings I use on a Flashforge Adventurer 5M Pro with a 0.4 mm nozzle in Flash Studio. OrcaSlicer, Bambu Studio and PrusaSlicer have equivalent settings. With them, the slicer estimates about 1 h 55 min and 59 g of PLA.
Material: PLA. The photo shows a dark "galaxy" sparkle PLA, which hides layer lines well on the twisted faces.
Layer height: 0.2 mm
Wall loops: 2
Wall generator: Arachne. This matters: Classic can't fit the slightly thicker hex corners and fills them with zig-zags on every layer.
Ensure vertical shell thickness: None. On sloped, twisted walls the default adds patches of solid infill that make the head go back and forth.
Seam position: Aligned. The seam tucks into a hex corner and follows it up the twist.
Top/bottom shells: 5 bottom layers
Infill: 15% gyroid (it's only used in the floor)
Supports / brim: none. Print it standing on its base. All overhangs are gentle.
With these settings, everything above the floor is just the two wall lines, so the head goes smoothly around the shape on every layer.
Tips
Add weight to the base. 10280 has 756 pieces and is top-heavy, so pour 200–300 g of rice or aquarium gravel into the vase before adding the flowers.
It's designed for LEGO flowers, not water. It hasn't been tested as watertight.
There's a smaller matching version for the LEGO Botanicals Daisies set (11508) on my profile.
LEGO® is a trademark of the LEGO Group, which does not sponsor, authorise or endorse this model.