KA-50 Collective Grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Collective grip of ka-50. I may have uploaded a double or wrong model. Let me know if that's the case.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a grip and head I made based on the KA-50 helicopter collective. I used https://www.printables.com/@ED209no_2483840's head design as a base idea. Some of the STL files may be doubles or of another version I'm not sure. If I remember correctly the "part 7" was used as a dummy support that I printed and then placed underneath the raised section of the top lid at the appropriately paused layer height. anyways it worked out great for me... the diameter of the grip hole I measured to a piece of electrical metal tubing I had lying around. Here's my onshape link if you want to make changes: https://cad.onshape.com/documents/e46fb2dfa7543b97cf9e83b6/w/1d000dbd4f80d54d530a8524/e/7300349a44996acfc4b93d1c There are artifacts in it that I didn't use specifically I think the hat switch solutions. If there is interest I can share my FFBeast files for my solution to the actual collective but it's highly specific to my situation and solution.