GOEWS Milwaukee M12 Installer and Chuck Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Milwaukee M12 installer plate and chuck holder for the GOEWS wall system.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 1
- Wyświetlenia
- 33
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Milwaukee M12 installer plate and chuck holder built for the GOEWS wall system.
Included parts: the installer plate (about 48 x 103 x 46 mm) and the chuck holder (about 212 x 63 x 30 mm). STL and STEP files are included, plus a Bambu Studio 3MF.
Print settings from the included 3MF: Bambu Lab P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls, 10% 3D honeycomb infill, tree supports, ABS.
If you made the original model for this installer mount, please reach out, I have been searching for an hour for the original model I found and added the goews plates to and cannot find it again.