1 / 4
Pinceur "écraseur" de tuyau / hose “crushing” clamp — zdjęcie 1
1 / 4

Pinceur "écraseur" de tuyau / hose “crushing” clamp

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Le moyen de fermer un tuyau en attendant de reparer / How to shut off a hose while waiting for repairs

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
14
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

FR

À imprimer à la taille qui vous convient voir tuto en image.

il vous faudra un moyen de pression important à appliquer sur les pièces afin d'écraser le tuyau une pince ou un serre-joint par exemple voir photo pour moi un FatMax de Stanley (je n'avais rien de plus petit).

Ensuite pendant que l'ensemble est sous pression, posez votre ou vos colliers de serrage (4 possibles, 2 au centre et un à chaque extrémité.

Important 

Remplissage entre 15 et 30 % en nid d'abeille selon la résistance du tuyau à écraser.

Voilà

EN

Print at the size that works for you; see the illustrated tutorial.

You’ll need a tool capable of applying significant pressure to the parts in order to crush the hose—a pair of pliers or a clamp, for example; see the photo. I used a Stanley FatMax (I didn’t have anything smaller).

Next, while the assembly is under pressure, install your hose clamps (up to 4 possible: 2 in the center and one at each end).

Important

Fill the honeycomb structure between 15 and 30% depending on the hose’s resistance to compression.

Voilà

Tagi