Retroid Pocket Classic Handheld Case (4 buttons)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slightly modified version of 3D Replica's design from Maker World.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A slightly modified version of 3D Replica's design from Maker World. I've fixed the position of the start and select button recess and added a small fillet to that and the d-pad recess. Split the model into its constituent parts as separate stls for easier printing on my more basic machine. Does a great job of protecting my Retroid Pocket Classic.
As tolerances are tight, I suggest it is printed at 101 or 102% to allow a bit more wiggle room for the console, depending on your printer and the material used. I printed in PLA at 0.2mm layer height with 4 walls and 15% infill. The separated flap is difficult to insert without breaking it when printed with PLA, but to be honest it's not entirely necessary as it doesn't leave much storage space when closed.