Horseshoe Earring — Forged Shoe with Fuller, Nail Holes & Heel Calks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A realistic hand-forged horseshoe as a drop earring, 22 × 25 mm: round toe, converging branches
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 1
- Wyświetlenia
- 31
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
A horseshoe that looks like it came off a hoof, not a clip-art U. It is shaped like a farrier's shoe: a round toe, nearly straight branches that pull in slightly toward the heels, an opening about half the shoe's width, and a fuller crease carrying four rectangular nail holes on each side. Square-cut heels, turned-down heel calks and a rounded ground-face edge complete the profile. A small forged eye at the toe takes the jump ring, so the shoe hangs open-end down.
Details
22 mm wide, 25 mm tall with the eye, 2.2 mm bar (3.4 mm over the calks)
Prints FLAT, hoof face on the bed, no supports — every feature builds upward
Eight real through-holes plus the eye, all in the fuller like a working shoe
Ø2.5 mm eye, thinned to 1.6 mm so a standard 4 mm jump ring closes over it
Symmetric — the same file is the left and the right earring
Everything is adjustable in the included .scad: overall scale (sf), toe and heel web width, bar thickness, edge rounding, branch angle and length, fuller width and depth, nail-hole size and positions, calk size and eye size. Set part="pair" to lay out two earrings side by side.
Files
horseshoe_earring.stl— one earring, ready to slice; print twohorseshoe_earring.scad— parametric source
Print settings
Flat on the bed as exported, no supports; 0.12–0.16 mm layers keep the fuller crisp
PLA, PETG or a silk/metallic filament for an iron look; 3 walls
Add a jump ring + ear hook through the eye at the toe
