Wooden coffin / box with poseable skeleton for Halloween
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Coffin for Halloween, with a poseable skeleton
- Ocena
- 0 / 5
- Polubienia
- 70
- Pobrania
- 212
- Wydruki
- 0
- Wyświetlenia
- 776
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
This is my wooden coffin I made for Halloween.
It has wooden tectures on outside, so it looks like real wood. I printed it in PLA brown, but woodfill would be even more realistic.
The skeleton has movable joints, which makes it fun to assemble and pose in different ways
Yoy can ofc print only the box if you want to keep other stuff in it, and scale it up if you need it bigger.
Slicer settings:
I recommend 0.10mm layer height for more realistic wooden textures. I added a 3mf print file for Prusa slicer with my settings. The coffin lid requires supports. I added a color change at layer 86 (7.8 mm) to print the cross and the top outer edge in a different color. You can also add another color change at layer 92 (8.4 mm), if you want the cross and the top outer edge in different colors. Because of the color change on the lid, it's best to print on two plates.
I had to use brim for the skeletion, and it was easy and satisfying to remove. But you may not need it if your build plate is clean enough.
Wooden textures was added with the help of bumpmesh.com, by CNCKitchen
The skeleton was made by Gabriel Rosiak: Poseable Skeleton Army © 2024 by Gabriel Rosiak is licensed under CC BY 4.0