Behringer X Air XR18 under desk mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple mount to hang the mixer under my desk when at home. and easy to bring when needed elsewhere
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
Needed a way to hang the mixer under a desk. Did not find what i was looking for so i cadded this thing. Seems to work great. easy to hang/unhang and out of the way when hanging. Really happy with it so far
Did a large cutout in the center piece to allow for air to move. I hope it will be enough
screwed the center piece with 4x20mm wooden screwes to the desk
used the mixers original screws to fasten the rails to the mixer
Printed using PETG used 3 lengths of masking tape to tightening tolerances. widening the center piece screwed to the table by .3mm would result in the same fit but i did not want to waste plastic to print one more version when it was that close. I might replace the masking tape with transparent office tape or vinyl strips at a later stage.
possible improvements in the future: I might add a more substantial stop/support behind the mixer if it turns out to need more stabilization
