1 / 14
A Small Desk Lamp! — zdjęcie 1
1 / 14

A Small Desk Lamp!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a lamp I designed myself to serve the specific purpose of being able to fit on my small desk.

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
8
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Public Domain

This is a small, simple desk lamp that I created for Hack-club Atlantis... It is not fully tested in the sense that It is my first ever project that I have built in CAD. The tolerances have been tested and seem to work on the simulation within On Shape! 

Please let me know if there are any issues with the design if you print it! I would love to hear some constructive criticism! 

The bulb holder can be redesigned to fit a bulb of your choice, the bulb I had created it for was a modified LED bulb, which I had created the bulb holder to attach onto. 

The design is modular too, so if you would like to change anything, you can! i.e. an example modification would be a phone holder on the first arm of the lamp! 

(Step files included for all the parts! Feel free to modify!)

TECHNICAL SPECS:

The lamp has a base diameter of 15 centimetres, with each "Arm" having a diameter of 1.495 centimetres. Within each of the parts is a hole created for wires to be able to go through, which is 0.55 centimetres in diameter.  

ASSEMBLY INSTRUCTIONS:

Ensure the wiring used is flexible and thin enough to go through a 0.55 cm gap!

To make the installation easier, you may want to run the wiring through the individual parts first before following the instructions below!

1) Into the base of the lamp, screw in Arm 1 (using the threads)

2) Then screw in the top mount into Arm 1

3) Then into the top mount install Arm 2 (the intermediary between the adjustable section of the lamp)

4) Then screw in Arm 3 into arm 2

5) To install the bulb holder assembly, use a nut and bolt which will fit into the hole to allow the bulb holder to be adjusted to any particular angle and then tighten the bolt to ensure it remains at that angle! 

Please view the reference images (The last one is the whole lamp together) if you are unsure of where and how to install each part!

Tagi