1 / 2
Double Wall Hook for Coats and Bags — zdjęcie 1
1 / 2

Double Wall Hook for Coats and Bags

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Screw-mount double wall hook: long upper arm for coats, short lower arm for bags. Printed on its side for strength.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
11
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Screw-mount double wall hook: long upper arm for coats, short lower arm for bags. Printed on its side for strength.

  • Upper arm 40 mm, lower arm 25 mm, rounded tips

  • Two countersunk holes for 4 mm screws

  • Printed lying on its side so layers follow the hook

Print settings

A1 mini, 0.20 mm, PLA: 17 min (9 g). No supports. Bambu Studio project included.

Parametric OpenSCAD source included: change the values at the top of the file.

About this design

Checked for overhangs and bed fit, and sliced in Bambu Studio before release. Pictures are 3D renders. Makes and feedback welcome.

Español

Percha doble de pared con dos tornillos avellanados; se imprime tumbada. 17 min (9 g).

العربية

علاقة جدارية مزدوجة للمعاطف والحقائب.

Tagi