Volvo XC90 Luggage Cover Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printable replacement holder for the Volvo XC90 Luggage Cover Support part number 39838905
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
.3D printable replacement holder for the Volvo XC90 Luggage Cover Support,part number 39838905
This part is designed to replace a broken, missing, or damaged original holder, allowing you to keep using the sunshade without replacing the complete kit.
Features
Compatible with Volvo sunshade kit 39838905
3D printable replacement part
Easy to install
Ideal for replacing a broken or missing holder
Designed to replicate the function of the original part
Recommended Print Settings
Recommended materials: PETG, ASA, or ABS
PLA can be used for testing, but is not recommended for long-term use inside a vehicle due to the high temperatures that can occur in direct sunlight.
Adjust the number of walls/perimeters and infill depending on the required strength.
Material: PETG, ASA, or ABS
Nozzle: 0.4 mm
Layer height: 0.20 mm
Perimeters / Walls: 2
Infill: 100%
Supports: No
Brim: No
Disclaimer
This is an independently designed replacement part and is not an official Volvo component.
Compatible kit reference: 39838905
If you print this model, feel free to share a photo of your make and your print settings.