iPhone 16 Case with Camera Protection
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slim fitting case that still offers good protection for edges, corners, and the camera.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The case was designed using the iPhone 16 design specs for a clean fit. The edges have a cupped "crumple zone" which should give it good fall protection while staying slim. The top lip works with a glass screen protector.
I printed it with Overture 95A TPU at .2mm layer height. My support settings had a 70° support overhang angle with support placement set to everywhere.
The camera bumper is meant to be glued into place but will hold in place as is with the phone in as long as you don't shove it into a tight pocket. I used a small bead of shoe glue spread with a tooth pick in the wedged slot and it is holding strong with normal use.
Files already have the model in the correct print orientation (back of phone on build plate). The camera bumper can be printed without supports.
Remix the file or leave me a comment if you have some suggested changes.