1/144 enclosed display base gunpla
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 1/144 enclosed display base for gunpla. This was an simple idea I had but some part that I was hoping to do…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 583
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a 1/144 enclosed display base for gunpla. This was an simple idea I had but some part that I was hoping to do with it did not work out, so I will put it up here and come back and see if there's anything i can do with this later.
to complete this you will need some clear PERSPEX
1X 210mm X 265mm X 3mm
2X 210mm X 185mm X 3mm (i would recommend this be mirrors as these are the back parts)
This is a WIP at this time as no test prints have been done, once a test print has been dome this will be removed, parts may not work and are subject to change, if any change happens I will leave a note in this part with the date.
Category: Model Robots