Raspberry Pi Zero / Zero W with Geeekpi Dongle USB Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raspberry Pi Zero / Zero W with Geeekpi Dongle USB Case
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi everyone!
Here is my custom enclosure for the Raspberry Pi Zero combined with the GeeekPi USB Dongle.
Enjoy and happy printing! If you like this model, please leave a like and a comment with your makes.
Key Features & Design Choices:
Heatsink Clearance: Designed with enough vertical room (using standoffs) to fit taller, high-profile heatsinks.
Seamless Integration: It encloses the original GeeekPi acrylic case plates while keeping full, unobstructed access to the USB and HDMI ports.
Protected MicroSD: Accessing the MicroSD card requires opening the case. Since I manage the Pi remotely, I prioritized keeping the card safely shielded inside.
RF Friendly: Features an integrated vent/grille pattern to ensure optimal airflow and prevent wireless signal interference.
GPIO Area: I don't use GPIO pins on this build (unsoldered), so I created an optional clip-on cover for that slot. Alternatively, you can solder the header inverted (facing downwards) to take advantage of the bottom clearance.
Required Hardware:
M2 screws and nuts (I personally used nylon screws and nylon standoffs).
Customization Note: The colored text shown in the photos is part of my personal setup and is not included in the STLs. You can easily add and emboss/deboss your own text directly inside your slicer.
That's all folks!
Liked my model? Buy me a coffee or a beer to fuel my late night work on the next one!
