Comically large button (functional)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A comically large functional button that only uses copper tape. This is the 2nd model of hopefully many for Atlantis
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Do you need a button? Does it need to be funny for some reason? Well, you are in luck, by the rule of LARGE=FUNNY you can have your own functional 3D printed comically large button for some filament and copper tape
PARTS
CLB-button 1x
CLB-housing 1x
CLB-spring 2x
CLB-bottom 1x
INSTRUCTIONS
Print everything
Cut 2 strips of copper tape and stick them to the raised contact point of the button and the bottom, ensure to add enough copper tape so that soldering the wire won't interfere with the contact
Solder your wires to the copper tape (be careful to not melt the plastic too much)
Place the button inside the housing and pass the wire trough the hole
Place the two flat springs inside the buttons rectangular holes
Pass the bottom part wire through the hole and and assemble but don't glue yet
Test with a multimiter
Glue the bottom to the housing