2022-2026 Triumph Tiger 1200 GPS Handle Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
GPS support handle for 2022-2026 Triumph Tiger 1200s
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
This is a GPS/Android Auto/Car Play mount handle that I designed for my 23 Triumph Tiger 1200 GT Explorer. From the research I have done, this will fit 2022-2026 Gen 4 Tiger 1200s. This will replace the factory handle. The holes for the screws are designed to accept M6 heated thread inserts and the factory screws can then be used as the are M6 as well. I included the little slots above and below the mounting holes just like the original handle as the bike has small protrusions that go into those slots to help locate the handle to the holes on the bike.
I designed the diameter of the bar based on this Android Auto/Apple Car Play unit from Amazon https://www.amazon.com/dp/B0FM3GDPF1?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1.
I have included the .f3d file in case you need to make any adjustments to the diameter for you own GPS mount. If you make any modifications and post it, I'd appreciate a mention to my original one if you wouldn't mind. But that is totally up to you.
I am currently using mine out of PLA, printed at a 45 degree angle. I was just going to see how well it would hold up but PETG would probably be best if yours will be sitting in the sun for extended periods of time. Mine has spent a decent amount in the sun with no ill-effects yet, though.
