Electric Guitar Control Cavity Routing Template
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Three piece set of electric guitar control cavity routing template
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Three piece set of electric guitar control cavity routing templates. Inner route (do this one first), the outer route (done second, resulting in the 'shelf' your control plate sits on), and finally the actual cover plate.
The control plate is designed with zero clearance so you can sand it to the correct tolerance for your material and finish options. It would naturally need to be very different If you choose pickguard material versus matching body wood (where even the finish is going to add to the size) so having it exact and being able to sand it to your exact needs felt like the best option.
Vertical and horizontal markers included to help with positioning. Designed as 10mm deep (height) to give plenty of wiggle room for router bits and bearings.
Personally I print in PETG with 6+ walls and 30+% cubic infill for strength, but you could probably get away with less walls and infill.