EZT T1 Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The stock filament holder that came with my EZT T1 didnt have enough room on it for a 1 kg spool :-( So I figured that…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The stock filament holder that came with my EZT T1 didnt have enough room on it for a 1 kg spool :-( So I figured that I needed to make my own :-) This will fit the stock holes on top of the plate, and is "bolt on" for the EZT T1 (and maybe others?) Distance between screw holes is about 51 mm if my memory is correct.
I added an aditional 20mm in the length to make sure it takes as many different spools as possible. It is "just" 5 mm thick, and Im testing the max out of it for the moment, and unless it breaks, it would be plenty strong enough for a 1 kg spool :-)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.24
Infill:
50
Filament: Fiberlogy PLA PLA black
Notes:
I printed this with PLA, at 60mm/s at .24 mm layer hight, and with 50% infill :-) 100% might be needed, but still testing the performance :-)
Category: 3D Printing