BC-250 Custom 3D-Printed Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An other Custom case in the BC-250 community
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A custom case I designed and 3D printed for my BC-250, with a separate frame and patterned ventilation grilles.
The case accommodates the BC-250 board, its fan bracket assembly, fan hub, heatsink for vram and a Metalfish 500 W Flex power supply. The frame and panels can be printed in different colors to customize the look.
Printing
Minimum build plate size: 220x220
Estimated total print time: ~40 hours, depending on your printer and settings, excluding failed prints
Print the frame and panels in matching or contrasting colors
PLA (estimated 1,1kg of filament) or better
0.2 layer height
20% infill
Gyroid pattern infill
Support as need, tree or normal
Hardware
BC-250 board
Metalfish 500 W Flex power supply (https://fr.aliexpress.com/item/1005009609601844.html)
M.2 NVMe SSD (https://fr.aliexpress.com/item/1005008637007198.html)
Cooling fans (https://www.amazon.fr/dp/B0DJD8MJ5S)
fan hub (https://www.amazon.fr/dp/B087FY5CNT)
20 × M3 × 12 mm countersunk screws — a few spares are useful (https://www.amazon.fr/dp/B09Y2SDQKS)
16 mm panel-mount power button (https://fr.aliexpress.com/item/1005009523726118.html)
2 × 100 × 40 × 20 mm additional heatsinks (https://fr.aliexpress.com/item/1005010758892071.html)
Double-sided thermal adhesive tape for tape the heatsinks (https://www.amazon.fr/dp/B098NJL48P)
Assembly
Follow the illustrated assembly guide for the mounting sequence.
A few things to keep in mind:
Fit the panels before installing the case screws: the same screws secure both the panels and the frame.
Position the vented bottom panel on the power supply side.
Leave the fan grilles off until the board and power supply are aligned and the cables are routed.
Gently flex the front panel to engage its edges in the frame grooves.
Attach the additional heatsinks to the backplate using double-sided thermal adhesive tape. The heatsinks must not exceed 20 mm in height to fit inside the case otherwise it touch the fan.
If you print this case, I’d love to see your build! Feel free to share a Make, your color choices, and any feedback on the assembly.
AI disclaimer :
AI was used only to help write the assembly guide and this post. The case was designed entirely by me.
If you want to send me some robux ;) https://ko-fi.com/placebow