Iceco JP30 Fridge Low Profile Handles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Low profile handles for Iceco JP30 fridge (non-wheeled version).
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Low profile handles for Iceco JP30 fridge (non-wheeled version). I designed these to replace the original grab handles since I needed the fridge to fit in a very tight space. I created the original sketch, and used AI polish the model with curves.
One trade off is that now you will need decent finger strength to carry the fridge, but it is still significantly better than trying to lift your fridge without handles.
Requires new screws. I used flat top m6 x 1.0 x 25mm screws. You may want to use washers to prevent marring of the screw hole.
Printed with PETG @ 0.2mm layer height. I do not recommend printing with PLA due to the potential to warp. I recommend at least PETG, or better yet, ASA or ABS.