Squirrel & Fox Mini Sandboxes — Removable Lids
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two woodland animal mini sandboxes with lift-off lids, matching the original turtle sandbox size. STL + 3MF.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
Squirrel & Fox Mini Sandboxes
A woodland pair inspired by the miniature turtle sandbox: a squirrel with a curled tail and a fox with pointed ears and a swept tail. Each animal has a hollow base and a removable lid.
Preview images are Blender renders. These models have passed mesh, clearance and slicing checks, but have not been physically printed or fit-tested yet.
Size
Each base: 100.05 mm wide × 115.33 mm long × 19.625 mm high.
Each lid: 98.875 mm diameter × 15.288 mm high.
Closed height: approximately 22.60 mm.
Print at 100% scale in millimeters. These dimensions match the reference turtle model; compatibility with its original lid is not established.
Files
Four STL files: a base and lid for each animal.
Four optional 3MF files with separate color regions. Import each as one multipart object and assign your own filaments; these are geometry files without a printer profile or G-code.
Editable Blender source and Print_Instructions.txt.
Printing
Suggested starting point: PLA, 0.4 mm nozzle, 0.16–0.20 mm layers, 3 walls, 15% infill and 4–5 top/bottom layers.
Base: flat bottom on the bed, bowl facing up.
Lid: skirt on the bed, tail facing up.
Enable supports beneath the face and inside the lid. Tree/organic supports are a useful starting point; review the sliced preview. Add a 3–5 mm brim if needed.
Nominal lid clearance is 0.35 mm per side. Remove support material and test the fit gently; printer calibration and material affect fit.
Slicing estimate: roughly 72–74 g of PLA per complete animal including supports, depending on settings.
Single-color STL prints can be painted. Suggested colors: chestnut/ivory/dark for the squirrel and orange/ivory/dark for the fox.
Source credit & design
Inspired by Little Tikes Turtle Sandbox by madebyaadil (listed as Creative Commons Public Domain), which credits the earlier turtle sandbox design by SpaceWalk. The squirrel and fox geometry was built anew with AI-assisted procedural modeling in Blender; no downloaded original mesh is included. This is an independent fan-inspired miniature and is not an official Little Tikes product.