1 / 2
Pokemon CGC Slab Holder — zdjęcie 1
1 / 2

Pokemon CGC Slab Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A container that holds up to 20 CGC slabs (or any of similar dimension.)

Ocena
0 / 5
Polubienia
2
Pobrania
4
Wydruki
0
Wyświetlenia
59
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Share Alike

When you stack your graded cards, do you ever worry that the stack might fall over and damage the slab? Well, fear no more! with this container, you can store up to 20 CGC-sized slabs cleanly, with very easy access! Just twist the knob, and your cards pop right up! When you're done organizing, pull the latch behind the box upwards, and watch your cards disappear into this rectangular pokeball! It's not actually magic, though. The box lifts and descends using a scissor lift mechanism, and it locks in place using a pawl and ratchet mechanism. 

Instructions:

Print each piece individually.


1.  take 2 "Popsicles" and the rivet and assemble them as shown in the image below. You want to glue the outer popsicle to the rivet, and leave the inner one loose. Repeat this twice.

  1. Take the first insert and put it in the long hole of the base. Then, glue each end of the inset to the two scissors with one side having the inner popsicle glued, and the other side having the outer one.

  1.  With the pawl/ratchet (ratchet is the second bottom insert,) slide the ratchet in while also sliding it through the 2 other popsicles holes. place the pawl on it's little thing on the base (don't glue it, the casing will hold it in place) 

  2. repeat steps 2 and 3, but ignore the pawl and ratchet and just use regular inserts. make sure the popsicle sticks are diagonal.

  3. Glue what you have into the shell. Slide both lids into the hinges before gluing the hinges to the shell.

  4. Finally, Glue the ratchet lid onto the ratchet insert. I recommend orienting it strategically for maximum comfort while opening the box.

    Tada!!!

Tagi