A very cool fidegty planetary gearbox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A planetary gearbox that you can rotate each part individual like the outer ring, the planet carrier and the sun gear
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This has a total of 11 parts, with some that you need to glue
We need to glue the 3 handles, the sun gear handle, the planet carrier handle and finally the ring handle
The sun gear handle will be glue onto the smallest cylinder that's attached to the sun gear
The planet carrier handle will be glue onto the second biggest cylinder between the biggest one and the smallest, it is also attached to the main planet carrier
and finally the ring handle will be glue onto the biggest cylinder that is attached to the main ring gear
After that we can go on and glue the stand
WARNING: BEFOR GLUING THE HANDLES PLEASE GLUE ON THE STAND FIRST
First put the ring gear onto the main stand then apply some glue onto the main stand after that put the holder top on and wait for it to cure. After all of that you can start putting other components then glue on the 3 handles and do the rest
Don't worry because the gear is biting on tight enough that we don't need a retainer and the stand has enough tolerance that the ring can spin freely
Inspiration from
3D Printer Academy