3/4” PVC Bracket for Painters Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These brackets were designed to hold 3/4” PVC. They link together to ensure consistent spacing between rods.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 264
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
These were prototyped in standard PLA and it seems to be perfectly suited to the task. I used the standard presets for printing, which are nozzle temp of 215, bed temp 60. No need for a brim.
They are designed to be attached to a long board, such as a 2x4 and linked to each other such that they form a series of poles that can be used as a painters rack. I use them for holding cabinet panels as they dry. I mount these to multiple 2x4s and have them hanging from a French cleat to allow adjustability between each set of poles.