Eufy Indoor Cam 2K Shelf Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shelf stand that hangs the Eufy Indoor Cam 2K upside down, like a ceiling mount, so it keeps its full range of motion.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I wanted the Eufy Indoor Cam 2K upside down so that I had full range of movement to see my son's cot. The camera is designed to be placed upside down on a ceiling to take advantage of the full range of motion, but on a shelf you can't see the floor.
The mount on top is JP Creations' wall mount, which copies the screw pattern of the stock Eufy plate, so the camera fixes on exactly as it would on the wall. The rest is my own design, modelled from scratch in Fusion 360 as a T-spline, so there are no hard edges anywhere on it.
Printing
Orientation: on its back
Supports: yes
0.2 mm layers, 3 walls, 20% infill (gyroid). It only needs enough weight not to tip.
Material: PLA / PETG / ABS / ASA. Example printed in Grey PLA+.
Footprint: 140 mm x 180 mm, 140 mm tall.
Fitting the camera
Fix the camera base to the underside of the top the same way you would to the wall plate. Nothing else to it.
Credit
The camera mount is taken from Eufy 2K Indoor cam wall mount by JP Creations: https://www.printables.com/model/717704-eufy-2k-indoor-cam-wall-mount . Give that one a like as well.
If you print one, post a make. I'd like to see it in other colours.