1 / 6
Aquarium Plant Hanger For Clippings and Propagation
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple hanger for plant clippings or stems to hang into your fish tank.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
This simple push fit planter for your fish tank or aquarium works for small plants or off cuts/shoots for propagation. There are 3 versions for 3mm, 5mm and 6mm glass rimless tanks. If you require any other sizes, or the current ones are a bit tight/loose for you let me know and I will see what I can do to help.
I've added extended versions of the hangers, these will help if your plant stem sits too far into the water.
Print in PETG with max infill or perimeter walls for the best strength.